What are the components of the Air Shock Absorber?

Air Shock Absorbers are a type of suspension system that use pressurized air to provide a smooth and comfortable ride. They are widely used in heavy vehicles such as buses and trucks, as well as some passenger cars and trains. Shock Absorbers have several advantages over conventional coil-spring suspensions, such as better load leveling, height adjustment, and noise reduction.

• What are the components of the Air Shock Absorber?

• What is the material of the Air Shock Absorber?

• How to use Air Shock Absorber better?

What are the components of the Air Shock Absorber?

1. Air springs: These are rubber bladders that inflate and deflate with air to support the weight of the vehicle and absorb shocks. They are usually located at each wheel or axle of the vehicle.

2. Compressor: This is a device that pumps air into the air springs to maintain the desired pressure and height. It is usually powered by the engine or an electric motor.

3. Reservoir tank: This is a container that stores excess air from the compressor for later use. It helps to reduce the load on the compressor and improve the system efficiency.

4. Lines: These are hoses or pipes that connect the compressor, reservoir tank, and air springs. They allow the air to flow between the components.

5. Valves: These are devices that control the amount and direction of air flow in the lines. They can be manual or electronic, depending on the system design.

6. Sensors: These are devices that monitor the air pressure, height, speed, and other parameters of the vehicle and send signals to the valves or a control unit.

7. Control unit: This is a computer that receives signals from the sensors and adjusts the valves accordingly to achieve the optimal ride quality and performance.

What is the material of the Air Shock Absorber?

1. Rubber: This is used for the air springs, as it is flexible, durable, and resistant to heat, cold, and chemicals. Rubber can also reduce noise and vibration in the system.

2. Steel: This is used for the compressor, reservoir tank, lines, valves, and other metal parts, as it is strong, rigid, and corrosion-resistant. Steel can also withstand high pressures and temperatures in the system.

3. Plastic: This is used for some parts of the compressor, valves, sensors, and control unit, as it is lightweight, cheap, and easy to mold. Plastic can also provide insulation and protection for electrical components.

How to use Air Shock Absorber better?

1. Check the air pressure regularly: The air pressure in the system should be checked at least once a month or before a long trip. Low or high pressure can affect the ride quality, handling, and safety of the vehicle.

2. Avoid overloading: The vehicle should not exceed its maximum load capacity or tow weight, as this can damage or rupture the air springs or other components.

3. Replace worn or damaged parts: The system should be inspected periodically for signs of wear or damage, such as leaks, cracks, rust, or corrosion. Worn or damaged parts should be replaced as soon as possible to prevent further problems or failures.

Air Shock-Absorbers are a type of suspension system that use pressurized air to provide a smooth and comfortable ride. If you are looking for a supplier of high quality Air Shock Absorber for home at a reasonable price , Ido Group Co., Ltd. is a very good choice.