What are the types of shock absorber?

shock absorbers are devices that reduce the impact of bumps and vibrations on a vehicle’s suspension system. They are also known as dampers, because they dampen the oscillations of the springs that support the vehicle’s weight. Absorbers are essential for improving the ride comfort, handling, and safety of a vehicle. In this essay, I will explain what are the purposes, types, and uses of shock absorbers.

• What are the purposes of shock absorber?

• What are the types of shock absorber?

• How do you use shock absorber?

What are the purposes of shock absorber?

1. Support: shock-absorbers help to maintain the proper height and alignment of the vehicle. They also prevent excessive bouncing or sagging of the vehicle due to load changes or road condition.

2. Control: shock-absorbers help to stabilize and balance the vehicle during braking, cornering and accelerating. They also reduce the noise and vibration caused by the road surface or the engine.

What are the types of shock absorber?

1. Hydraulic type: This is a type of shock absorber that uses oil as the fluid to absorb shocks. It has a cylinder, a piston, a rod and a valve. The piston moves up and down inside the cylinder when a shock occurs. The oil flows through the valve and creates resistance and damping.

2. Double acting: This is a type of hydraulic shock absorber that generates damping forces in both the extending and contracting strokes. It has two valves: one for compression and one for rebound.

3. Single acting: This is a type of hydraulic shock absorber that generates damping forces only in one stroke (usually compression). It has only one valve for compression.

4. Friction type: This is a type of shock absorber that uses friction to absorb shocks. It has two discs that rub against each other when a shock occurs. The friction creates heat and damping.

5. Lever type: This is a type of shock absorber that uses a lever and a link to transfer shocks from the wheel to a double piston arrangement. The pistons force oil through a valve and create damping.

How do you use shock absorber?

1. Park your vehicle on a level surface and loosen the lug nuts on both sides of the front or back end. Secure your vehicle with ramps and/or jack stands.

2. Remove the wheels and locate the shock absorbers. They are usually attached to the lower control arm and upper frame or strut tower.

3. Remove any bolts, nuts or clips that hold the shock absorbers in place. Be careful not to damage any brake lines, wires or hoses near them.

4. Pull out the old shock absorbers from their mounts and dispose of them properly. Compare them with the new ones and make sure they are compatible and fit well.

5. Install the new shock absorbers by reversing the removal steps. Make sure they are aligned and secured properly with bolts, nuts or clips.

6. Reinstall the wheels and tighten the lug nuts. Lower your vehicle and test drive it to check for any leaks, noises.

If you are looking for a supplier of high quality Factory Wholesale shock absorber for home at a reasonable price , Ido Group Co., Ltd. is a very good choice.